PHL 320 Week 2 Individual Assignment Globalization Argumentative Paper 

Review the Writing Argumentative Essays section in Ch. 3 of Critical Thinking

Write an argumentative paper of no more than 750 words that demonstrates why globalization is good or not good for a business. 

The paper should define the term good, and should identify the premises and conclusions.

Identify the premise and conclusion by placing a number in bold at the beginning of the sentence with the word premise or conclusion. 

For example: (1, Premise), (2, Premise), (1, Conclusion), (2, Conclusion), and so on.

· Sentences labeled as "1, premise" are premises for the sentence labeled as "1, conclusion."

· All premises should be labeled for each conclusion in the article. If a sentence is a conclusion and a premise for another conclusion, place two labels.

· At the end of the paper, identify one example of how you used deductive reasoning and one example of how you used inductive reasoning.

Format your paper consistent with APA guidelines.


Preview of solution:

Globalization Argumentative Paper
Globalization in business is the process in which companies will integrate internationally through commerce, business practices, ideas, and more. When companies move from local to global they have the opportunity to bring growth to the company and its employees that can bring great positive changes. When a company operates globally there are many good impacts that globalization will have on the company and its employees.
Globalization is Good
I believe globalization is good for companies. In the context of this paper the term ‘good’ means positive, or the concept that globalization will bring growth to a company both financially and through the hiring of employees. It represents the idea that a company will create wealth for its employees and shareholders and that globalization will have a positive impact on its consumers and the society in which it does business.
Manufacturing Internationally
(1, Premise) Globalization allows companies to manufacture certain parts or materials in countries where the resources are most available. For example, if a company sells cars in the United States they decide to open factories in countries in which it can make certain parts cheaper because the resources are more readily available. This is good for that company. The company is then able to save money on the manufacturing process and to keep its overall costs competitive. This allows the company to stay relevant in the marketplace and it also is a benefit to consumers. If a company can save on its costs to create the product, then they are able to offer it at a lower cost to consumers. (1, Conclusion) Therefore, companies can save money through globalization.

onlinehomeworkexperts@gmail.com

Phy 101 week 2 individual assignment textbook exerices

Phy 101 week 2 individual assignment textbook exercise

Chapter 2: 36, 39 & 47

36. As you stand on a floor, does the floor exert an upward force against your feet? How much force does it exert? Why are you not moved upward by this force?

39. In order to slide a heavy cabinet across the floor at constant speed, you exert a horizontal force of 600 N. Is the force of friction between the cabinet and the floor greater than, less than, or equal to 600 N?

47. The smokestack of a stationary toy train consists of a vertical spring gun that shoots a steel ball a meter or so straight into the air—so straight that the ball always falls back into the smokestack. Suppose the train moves at constant speed along the straight track. Do you think the ball will still return to the smokestack if shot from the moving train? What if the train gains speed along the straight track? What if it moves at a constant speed on a circular track? Why do your answers differ?

Chapter 11: 1, 3 & 10

1. How many types of atoms can you expect to find in a pure sample of any element?

3. When a container of gas is heated, what happens to the average speed of its molecules?

10. Your friend says that what makes one element distinct from another is the number of electrons about the atomic nucleus. Do you agree wholeheartedly, partially, or not at all?

Chapter 12: 2

2. Your friend says that the primary difference between a solid and a liquid is the kind of atoms in the material. Do you agree or disagree, and why?

Chapter 13: 3 & 57

3. Which is more likely to hurt—being stepped on by a 200-lb man wearing loafers or being stepped on by a 100-lb woman wearing high heels?

57. In the hydraulic arrangement shown in Figure 13.22, the multiplication of force is equal to the ratio of the areas of the large and small pistons. Some people are surprised to learn that the area of the liquid surface in the reservoir of the arrangement shown in Figure 13.23 is immaterial. What is your explanation to resolve this confusion?

Chapter 14: 12, 25 & 28

12. Why do you suppose that airplane windows are smaller than bus windows?

25. Why is it so difficult to breathe when snorkeling at a depth of 1 m and practically impossible at a 2-m depth? Why can’t a diver simply breathe through a hose that extends to the surface?

28. Why does the weight of an object in air differ from its weight in a vacuum (remembering that weight is the force exerted against a supporting surface)? Cite an example in which this would be an important consideration


Preview of solution:

Chapter 6: Momentum (Questions 8, 20, 58, and 60)
8.)        When a person falling feet-first hits concrete, they stop falling immediately; when a person hits soil, they almost stop immediately but the soil has a little give; and when a person hits water, the person is gradually slowed down by the water but not immediately stopped.  The ability to survive the impact of a feet-first fall depends on the type of surface that the person hits.  A surface that immediately stops the falling person allows no give, permitting for a slower speed value in surviving the fall.  A surface that gradually slows down the falling person allows a give, permitting for a faster speed value in surviving the fall.
20.)      A baseball catcher’s mitt has more padding because the catcher is constantly catching a baseball that is being thrown by the pitcher at excessive speeds over and over.  In order to cushion the constant impacts of the baseball being thrown, the catcher’s mitt must have a larger amount of padding than a conventional glove.
58.)      In order for the billiard ball to fully come to a stop on impact, the ball must transmit all of its kinetic angular momentum to the ball at rest.  Since a billiard ball traveling at an angle is not capable to transmit all of its kinetic energy to the ball at rest, it is incapable to wholly come to a stop on impact.
60.)      I agree with the first friend saying that it is related to the negative momentum of the golf ball after the collision with the bowling ball, because of the Law of Conservation of Momentum.  Since the initial momentum of the golf ball was in one direction, moving in the reverse direction after impact acquires negative momentum with recognition to the bowling ball’s momentum.  To counterbalance the negative momentum, the bowling ball’s momentum must be larger than the initial momentum of the golf ball.     
Chapter 7: Energy (Questions 14, 36, 42, 56, and 57)
14.)      When flexible fiberglass poles were first inserted into the sport of pole vaulting, it forced pole vaulters to alter their form to best fit the elastic potential energy of the new poles in comparison to the non-flexible stiff wooden pools that were previously used.
36.)      Work is force multiplied by distance.  The decreased force is compensated by a larger distance, therefore, the lever of the jack has to be shifted upward and downward numerous times.
42.)      The terminal speed of both balls is the same whether it was thrown downward or upward from the rooftop.  Once terminal speed is attained, falling a further distance does not affect the speed of either ball.
56.)      Momentum would be conserved if a single ball popped out with twice the initial speed.  Since kinetic energy equals 1/2mv², this circumstance would cause .0.the final kinetic energy twice as much as the initial kinetic energy.  For that reason, this does not happen.
57.)      No.  Energy is never lost.  By wasting energy, the machine is not as proficient at converting input into work as it could be.  Normally, the energy is converted into friction or heat and is considered as a loss, although, the total amount of energy is equal. 

PHY 101 Week 4 Learning Team Assignment Textbook Exercises

Chapter 19

            4. A weight suspended from a spring is seen to bob up and down over a distance of 20 cm twice each second. What is its frequency? Its period? Its amplitude?

6. On a keyboard, you strike middle C, whose frequency is 256 Hz.

(a) What is the period of one vibration of this tone?

(b) As the sound leaves the instrument at a speed of 340 m/s, what is its wavelength in air?

Chapter 20

            2. For years, marine scientists were mystified by sound waves detected by underwater microphones in the Pacific Ocean. These so-called T-waves were among the purest sounds in nature. Eventually they traced the source to underwater volcanoes, whose rising columns of bubbles resonated like organ pipes. What is the wavelength of a typical T-wave whose frequency is 7 Hz? (The speed of sound in seawater is 1530 m/s.)

4. A bat flying in a cave emits a sound and receives its echo 0.1 s later. Show that its distance from the cave wall is 19 m

Chapter 26

         4. Show that it would take 2.5 s for a pulse of laser light to reach the Moon and to bounce back to Earth

6. A ball with the same diameter as a light bulb is held halfway between the bulb and a wall, as shown in the sketch. Construct light rays (similar to those in Figure 26.14) and show that the diameter of the umbra on the wall is the same as the diameter of the ball and that the diameter of the penumbra is 3 times the diameter of the ball

         2. Show with a simple diagram that when a mirror with a fixed beam incident upon it is rotated through a                     certain angle, the reflected beam is rotated through an angle twice as large. (This doubling of displacement                  makes irregularities in ordinary window glass more evident.)

       4. When light strikes glass perpendicularly, about 4% is reflected at each surface. Show that 92% of light is                      transmitted through a pane of window glass

              

Preview of solution:

Chapter 19 (Questions 12 and 36)
 
12.)      If a wad of clay is placed on the free end of a clamped hacksaw blade, the vibration frequency of the blade,  ???  suspension point and since the distance between the suspension point and the center of gravity or mass increases which increase the moment of inertia, decreases. This will increase the period duration and the frequency decreases. A wad of clay, stuck in the middle of the blade will not displace the center of gravity as much  XXX  is the same, since so the system does not change will decrease the resonance frequency less. Thus, you cannot change the duration and frequency. XXX
 
36.)      Due to the relative motion between the source and listener, the sound standard because of a change in the pitch of the sound is clear and when the listener is in motion, there is a Doppler effect. The listener to hear the sound of a low frequency to high frequency sound to move toward the left. ??????
 
When moving toward the sound the listener will encounter each wave faster than he would if he were stationary and vice versa. In order to hear a higher frequency the listener needs to move towards to the sound. To hear a low frequency the listener has to move away from the sound.
 
Chapter 20 (Questions 16, 21, and 23)
 
16.)      When air is pumped out of the jar it creates a vacuum; that is, a region devoid of matter.  Sound waves need the air as a medium to travel in, therefore we cannot hear the bell ring. While the differences in the properties of light and sound waves ??? sound  XXX light waves do not need any medium, which indicates that their spread will require a medium. so it is possible to see the bell ring.
 
21.)      It is the sound of a low temperature, ??? 
 
because cold air molecules travels slower. they will take longer to collide.  Warm air has a high temperature, so the molecules are moving faster and will hit and push each other around sooner.  and thus, the sound velocity is higher.
 
23.)      Speed of sound in air, heat, and are not affected by other conditions, if sound distortion cannot be. This is because the sound distortion that occurs when there is a change of medium. ?????????  No. Refraction occurs due to sound traveling at a different speeds in various different places -- such as places on the sound wave fronts moving at different speeds due to environmental conditions. Without such changes in sound speed there would be no refraction.onlinehomeworkexperts@gmail.com

Phy 101 week 1 individual assignment textbook exercises

Phy 101 week 1 individual assignment textbook exercises

Chapter 3

20. Suppose that the three balls shown in Exercise 19 start simultaneously from the tops of the hills. Which one reaches the bottom first? Explain

22. Which is greater, an acceleration from 25 km/h to 30 km/h or one from 96 km/h to 100 km/h if both occur during the same time?

Chapter 4

14. Gravity on the surface of the Moon is only 1/6 as strong as gravity on Earth. What is the weight of a 10-kg object on the Moon and on Earth? What is its mass on each?

18. A grocery bag can withstand 300 N of force before it rips apart. How many kilograms of apples can it safely hold?

Chapter 5

14. If you exert a horizontal force of 200 N to slide a crate across a factory floor at constant velocity, how much friction is exerted by the floor on the crate? Is the force of friction equal and oppositely directed to your 200 N push? If the force of friction isn’t the reaction force to your push, what is?

Chapter 6

8. A person can survive a feet-first impact at a speed of about 12 m/s (27 mi/h) on concrete; 15 m/s (34 mi/h) on soil; and 34 m/s (76 mi/h) on water. Why the different values for different surfaces?

20. Why does a baseball catcher’s mitt have more padding than a conventional glove?

Chapter 7

14. Explain how “elastic potential energy” dramatically changed the sport of pole vaulting when flexible fiberglass poles replaced stiffer wooden poles

36. When the girl in Figure 7.16 jacks up a car, how can applying so little force produce sufficient force to raise the car?

 Chapter 9

12. An apple falls because of the gravitational attraction to Earth. How does the gravitational attraction of Earth to the apple compare? (Does force change when you interchange m1 and m2 in the equation for gravity— m2m1 instead of onlinehomeworkexperts@gmail.com m1 m2?

22. The planet Jupiter is more than 300 times as massive as Earth, so it might seem that a body on the surface of Jupiter would weigh 300 times as much as on Earth. But it so happens that a body would scarcely weigh 3 times as much on the surface of Jupiter as it would on the surface of Earth. Can you think of an explanation for why this is so? (Hint: Let the terms in the equation for gravitationalforce guide your thinking.)

Contact us to connect with a Tutor
24*7 Live chat with Expert Tutors www.onlinehomeworkexperts.com

PHY 101 Week 4 Learning Team Assignment Textbook Exercises

   

onlinehomeworkexperts@gmail.com

Chapter 19

            4. A weight suspended from a spring is seen to bob up and down over a distance of 20 cm twice each second. What is its frequency? Its period? Its amplitude?

6. On a keyboard, you strike middle C, whose frequency is 256 Hz.

(a) What is the period of one vibration of this tone?

(b) As the sound leaves the instrument at a speed of 340 m/s, what is its wavelength in air?

Chapter 20

            2. For years, marine scientists were mystified by sound waves detected by underwater microphones in the Pacific Ocean. These so-called T-waves were among the purest sounds in nature. Eventually they traced the source to underwater volcanoes, whose rising columns of bubbles resonated like organ pipes. What is the wavelength of a typical T-wave whose frequency is 7 Hz? (The speed of sound in seawater is 1530 m/s.)

4. A bat flying in a cave emits a sound and receives its echo 0.1 s later. Show that its distance from the cave wall is 19 m

Chapter 26

            4. Show that it would take 2.5 s for a pulse of laser light to reach the Moon and to bounce back to Earth

6. A ball with the same diameter as a light bulb is held halfway between the bulb and a wall, as shown in the sketch. Construct light rays (similar to those in Figure 26.14) and show that the diameter of the umbra on the wall is the same as the diameter of the ball and that the diameter of the penumbra is 3 times the diameter of the ball

2. Show with a simple diagram that when a mirror with a fixed beam incident upon it is rotated through a certain angle, the reflected beam is rotated through an angle twice as large. (This doubling of displacement makes irregularities in ordinary window glass more evident.)

4. When light strikes glass perpendicularly, about 4% is reflected at each surface. Show that 92% of light is transmitted through a pane of window glass


Preview of solution:

Chapter 19 (Questions 12 and 36)

12.)      If a wad of clay is placed on the free end of a clamped hacksaw blade, the vibration frequency of the blade,  ???  suspension point and since the distance between the suspension point and the center of gravity or mass increases which increase the moment of inertia, decreases. This will increase the period duration and the frequency decreases. A wad of clay, stuck in the middle of the blade will not displace the center of gravity as much  XXX  is the same, since so the system does not change will decrease the resonance frequency less. Thus, you cannot change the duration and frequency. XXX

36.)      Due to the relative motion between the source and listener, the sound standard because of a change in the pitch of the sound is clear and when the listener is in motion, there is a Doppler effect. The listener to hear the sound of a low frequency to high frequency sound to move toward the left. ??????

When moving toward the sound the listener will encounter each wave faster than he would if he were stationary and vice versa. In order to hear a higher frequency the listener needs to move towards to the sound. To hear a low frequency the listener has to move away from the sound.

Chapter 20 (Questions 16, 21, and 23)

16.)      When air is pumped out of the jar it creates a vacuum; that is, a region devoid of matter.  Sound waves need the air as a medium to travel in, therefore we cannot hear the bell ring. While the differences in the properties of light and sound waves ??? sound  XXX light waves do not need any medium, which indicates that their spread will require a medium. so it is possible to see the bell ring.

21.)      It is the sound of a low temperature, ???

because cold air molecules travels slower. they will take longer to collide.  Warm air has a high temperature, so the molecules are moving faster and will hit and push each other around sooner.  and thus, the sound velocity is higher.

23.)      Speed of sound in air, heat, and are not affected by other conditions, if sound distortion cannot be. This is because the sound distortion that occurs when there is a change of medium. ?????????  No. Refraction occurs due to sound traveling at a different speeds in various different places -- such as places on the sound wave fronts moving at different speeds due to environmental conditions. Without such changes in sound speed there would be no refraction.

Contact us to connect with a Tutor
24*7 Live chat with Expert Tutors www.onlinehomeworkexperts.com

PHL 320 Week 2 Individual Assignment Globalization Argumentative Paper 

Review the Writing Argumentative Essays section in Ch. 3 of Critical Thinking

Write an argumentative paper of no more than 750 words that demonstrates why globalization is good or not good for a business. 

The paper should define the term good, and should identify the premises and conclusions.

Identify the premise and conclusion by placing a number in bold at the beginning of the sentence with the word premise or conclusion. 

  For example: (1, Premise), (2, Premise), (1, Conclusion), (2, Conclusion), and so on.

· Sentences labeled as "1, premise" are premises for the sentence labeled as "1, conclusion."

· All premises should be labeled for each conclusion in the article. If a sentence is a conclusion and a premise for another conclusion, place two labels.

· At the end of the paper, identify one example of how you used deductive reasoning and one example of how you used inductive reasoning.

Format your paper consistent with APA guidelines.


Preview of solution:

Globalization Argumentative Paper
Globalization in business is the process in which companies will integrate internationally through commerce, business practices, ideas, and more. When companies move from local to global they have the opportunity to bring growth to the company and its employees that can bring great positive changes. When a company operates globally there are many good impacts that globalization will have on the company and its employees.

Globalization is Good
I believe globalization is good for companies. In the context of this paper the term ‘good’ means positive, or the concept that globalization will bring growth to a company both financially and through the hiring of employees. It represents the idea that a company will create wealth for its employees and shareholders and that globalization will have a positive impact on its consumers and the society in which it does business.

Manufacturing Internationally
(1, Premise) Globalization allows companies to manufacture certain parts or materials in countries where the resources are most available. For example, if a company sells cars in the United States they decide to open factories in countries in which it can make certain parts cheaper because the resources are more readily available. This is good for that company. The company is then able to save money on the manufacturing process and to keep its overall costs competitive. This allows the company to stay relevant in the marketplace and it also is a benefit to consumers. If a company can save on its costs to create the product, then they are able to offer it at a lower cost to consumers. (1, Conclusion) Therefore, companies can save money through globalization.

Contact us to connect with a Tutor
24*7 Live chat with Expert Tutors www.onlinehomeworkexperts.com

Mis 535 week 1 homework (quiz)

Mis 535 week 1 homework (quiz)




Contact us for Full solutions

Hrm 300 week 5 team assignment sustaining employee performance paper

HRM 300 Week 5 Team Assignment Sustaining Employee Performance Paper 

Resource: Company assigned to you by your instructor.

Use the company in the Virtual Organization assigned to you by your instructor in Week Four. 

Write a 1,400- to 1,750-word paper, due in Week Five, addressing the following:

 

• Identify two jobs within your assigned company.

 

• Describe the general function of performance management systems. If your assigned company does not use a performance management system, would you recommend it use one?

 

• Suggest two job evaluation methods for each of the positions your team has chosen. What would be the advantages and disadvantages of these methods, based on the positions you have selected? 

 

• Compare and contrast possible compensation plans for the two positions.

 

• Explain the importance of providing employee benefit plans to employees working in the chosen positions.

 

Format your paper consistent with APA guidelines.

Preview of solution:
 

Sustaining Employee Performance

            There are several job evaluation methods that can be used in order to evaluate an employee’s performance. Sometimes, these methods can differ based on the nature of the job. For the Human Resources Manager job, Riordan would benefit from the paired comparison method. This methodology compares employees based on job traits. Based on the nature of the job, several employees would be put into a group and evaluated based on their performance. This method “…ensures that each employee is compared against every other, but the method can become difficult when comparing large numbers of employees” (DeCenzo& Robbins, 2013). This method would be advantageous for the Human Resources Manager job as that position is not over-filled and there are only a certain number of employees that hold that title. Some disadvantages of this method could be the outcome of the evaluations. At some point the employees could feel like they are competing with one another based on the number of employees hired by their division.
            For the Finance Manager position, Riordan would benefit from the achieved outcomes evaluations. This approach is used by evaluating employees based on what they accomplished throughout the year. They would be appraised on their accomplishments compared to the objectives that were set for them. This type of approach is commonly referred to as the management by objectives method and is favored because of the emphasis made on converting overall objectives to objectives that are specific for individual employees. This type of process takes higher management goals and cascades them down, while changing them based on the job title. Disadvantages of this type of method could be the hierarchy of these goals. They are coming from higher management and could potentially be unrelated to specific job functions (DeCenzo & Robbins, 2013).

Employee Benefits

            Employee benefit plans are important because employees need and want to know that they have the necessary things and benefits on their job just in case something happens while they are employee by that particular company. They want to make sure that their health is taken care just as well as their finances also and that is why people are so involved with 401k these days because if they have 401k then they can have that money when they retire and when they need it for some unexpected expenses. Employees basically want to make sure that while they are employed with a particular employer their health and finances are in good shape otherwise they will find another employer to be employed with to get better results.

Contact Us for Solutions

Write Us: support@onlinehomeworkexperts.com

CJA 383 week 1 individual assignment the sentence

CJA 383 Week 1 Individual Assignment The Sentence

1. Individual Assignment: The Sentence

• Read the following scenario:

You are a judge and an individual appears before you convicted of stealing others’ identities for monetary gain. What specific information would be important to know before imposing a sentence? How would you incorporate the sentencing goals of retribution, incapacitation, deterrence, rehabilitation, and restitution in your sentence of this individual for this particular crime?

• Write a 350- to 700-word essay addressing the questions above.
Format your paper consistent with APA guidelines

GET A QUOTE!
COURSE | EXAM | QUIZ | HOMEWORK | WRITING ASSIGNMENT | PROJECT

CJA 325 module 5 assignment 1 lasa 2 case felony packet file preparation and trial preparation

CJA 325 module 5 assignment 1 lasa 2 case felony packet file preparation and trial preparation

This assignment will help you explore the history of discovery laws in your state and how the discovery laws might have changed for the better or worse today. It is coupled with learning how to prepare a case to be turned over to the district attorney's (DA) office and prep a case for trial.

You are a deputy assigned to the Criminal Investigations Division (CID) of the Roan County Sheriff's Office. You assisted in the Jenkins murder investigation and the Marshall attempted-murder investigation. You are in charge of preparing the case file (discovery) to be turned over to the DA's office. You are also in charge of working with the DA to prep the case for trial. Below is a list of tasks to complete to prep this case file to turn over to the DA's office. The last three points in the list help prep the case for trial. 

Click here to download the learning resources folder.

Complete the following tasks:

• Research the discovery laws in your state. What is discoverable in a criminal felony case? For example, under North Carolina General Statute Section 15A-501, all materials, including photos, notes, phone messages, etc., must be turned over to the state for prosecution of each felony case. Each state is different.

In a 1- to 2-page APA-formatted paper:

• Part I: Compare and contrast any changes your state has made to the discovery laws within the past twenty-five years.
• Part II: Compare and contrast your state's discovery law to North Carolina General Statute Section 15A-501.
• To prep the case to turn over to the state, read the District 5 Discovery Policy, which applies to the Jenkins murder case file and the attempted-murder case file of Marshall (two different cases; the same crime scene).
• To prepare the case to turn over to the state, Bates stamp, using the District 5 Discovery Policy numbering system outlined in #2 of the policy, all the documents in the case file (i.e., witness statements, evidence log, sketch, and lab report). If you do not have a Bates stamp, please follow the instructions in the District 5 Discovery Policy for inserting numbers in documents in #3 of the policy.
• To prepare the case to turn over to the state, use the Case Summary instructions and template provided in the learning resources folder and complete a Case Summary Form for this case with only the relevant facts to this case. Not every instruction will be used to complete this form.
• To prepare the case to turn over to the state, complete the Law Enforcement Officer Certification Form template provided in the learning resources folder, leaving the Assistant District Attorney Section blank.
• In preparation for trial, use the Spreadsheet template provided in the learning resources folder and use the first spreadsheet tab labeled Witness List to complete the items listed for all witnesses—civilians and law enforcement in this case.
• In preparation for trial, use the Spreadsheet template provided in the learning resources folder and use the second spreadsheet tab labeled List of Involvement to complete the items listed for all witnesses—civilians and law enforcement in this case.
• In preparation for trial, use the Spreadsheet template provided in the learning resources folder and use the third spreadsheet tab labeled Evidence List to complete the items listed for all witnesses—civilians and law enforcement in this case.

Recommendation: Keep this assignment in a safe place as you build a portfolio of your work to show future employers what you can do!

Submission Details:


GET A QUOTE!
COURSE | EXAM | QUIZ | HOMEWORK | WRITING ASSIGNMENT | PROJECT

CJA 383 Week 5 Learning Team Instructions The Corrections Task Force Project Program Presentation

2. Learning Team Instructions The Corrections Task Force Project—Program Presentation

• Prepare a 10- to 15-slide PowerPoint® presentation including detailed speaker’s notes for the County Board of Supervisors to showcase your work on this project. Your presentation must include and incorporate the following:

o The decisions and recommendations contained in the memorandum
o A press release
o A program summary
o The physical design of the proposed jail

• Include comments and references with each slide in the Notes section.
• Format your paper consistent with APA guidelines.


GET A QUOTE!
COURSE | EXAM | QUIZ | HOMEWORK | WRITING ASSIGNMENT | PROJECT

Mis 535 week 1 homework (quiz)

Mis 535 week 1 homework (quiz)





Get Online class Help,Or we can take your full class assured with A+ Grades

Visit Us: http://www.onlinehomeworkexperts.com
Contact Us: support@onlinehomeworkexperts.com

 #Accounting homework help,#Algebra homework help,#Applied Sciences homework help, #Ashford university, #assignment help